129 – Power and Speed – Ben Strader – Square Port Heads FTW

Mike, Tom, and Tad in studio.

What is GM doing?  For that matter what are most of the manufactures doing?  The guys feel GM is messing things up at almost every turn.

The long standing battle between square ports and cathedral ports takes another turn.  Ben Strader of EFI University calls in to discuss the latest findings between these two head types on two test engines.  Both of these are very high horsepower normally aspirated engines that make serious power per cubic inch.  Check this one out for some more insight into this whole subject.

If you are really serious about learning how to calibrate or build racing engines check out what EFI U has to offer.  You won’t be sorry.

Live again next week Monday night at 7:00 PM EST on Mixlr.com.  Call in number 908 751 0211.  Live callers welcome, and this will be the line for giveaways.

Like us on Facebook by going to Power and Speed Podcast and follow us on Twitter @powerspeedpod.  Listen to past archives on your favorite Podcast App, Tunein, YouTube, and SoundCloud on the web and your Sonos system.

New Episode Published


128 – Power and Speed – Power and Plumbing

Mike, Tom, and Tad in studio.

Well, Mike had a crappy week.  Mike was saddled with a plumbing disaster Friday night at his home this past week with a 4″ cast iron septic pipe deciding it was time to check out.  We don’t think we need to get into more detail than that.  Show prep has to take a back seat sometimes to real life, and this was one of them.  

With that lovely image in your head, enjoy your Thanksgiving!  Tune in next week for Ben Strader from EFI U.

 

Live again next week Monday night at 7:00 PM EST on Mixlr.com.  Call in number 908 751 0211.  Live callers welcome, and this will be the line for giveaways.

Like us on Facebook by going to Power and Speed Podcast and follow us on Twitter @powerspeedpod.  Listen to past archives on your favorite Podcast App, Tunein, YouTube, and SoundCloud on the web and your Sonos system.

New Episode Published


127 – Power and Speed – Eric Brooks of HP Tuners

Mike and Tom in studio.

Tad broke a ball joint and is sitting on the side of the road

(we had to tell you or you might not have noticed) 

We have to apologize ahead of time to Eric Brooks and our fans.  We were in a bad position after having missed two weeks.  We had a SEMA delay, an issue with the internet service being messed up, and now almost a third straight week of no show.  Mike got called in to a surprise budget meeting he could not miss.  That messed up our time, our prep, and the time we could devote to Eric.

Eric is a stand up guy and moved stuff around just to be on at our earlier time.  We will FOR SURE have Eric on to get more into HP Tuners and get much deeper into Ford programing in the very near future.

Live again next week Monday night at 7:00 PM EST on Mixlr.com.  Call in number 908 751 0211.  Live callers welcome, and this will be the line for giveaways.

Like us on Facebook by going to Power and Speed Podcast and follow us on Twitter @powerspeedpod.  Listen to past archives on your favorite Podcast App, Tunein, YouTube, and SoundCloud on the web and your Sonos system.

New Episode Published